I C S - 2 4 H E A D S E T S T A T I O N
2 - 1
QUICK START
1. Unpack the unit and inspect for any damage that may have occurred during
shipping.
2. Connect the RJ-45 connector to the Matrix frame. Connect the 14- to
18-VAC power to the two-terminal, plug-on connector.
3. Install the ICS-24 into the two-gang outlet box.
4. Connect the appropriate headset or handset.
5. Set listen levels and sidetones. (Figure 1 on page 1-2)
6. The headset station should now be operating properly.
7. Read the rest of this manual for further information.
• Users can use the “Quick
Start” approach to get
their stations up and
running in minutes.
• Note: When the station
is initially powered, the
call-waiting lamp will
blink slowly indicating the
station is attempting to
communicate with the
Matrix frame. Once
communication is
established, the blinking
will stop.
2
Содержание ICS-24
