ICS-22 Speaker Station | User Guide
Page 18
3
Quick start
Use the Quick Start approach to get panels up and running in minutes.
1)
Unpack the unit and inspect it for any damage that may have occurred
during shipping.
2)
Set the option switches to the default (up) position.
3)
Connect the RJ-45 connector to the Matrix frame.
4)
Connect 14- to18-VAC power to the two-terminal, plug-on connector.
5)
Install the ICS-22 into the USA standard four-gang outlet box.
6)
Set listen levels and sidetones (see Figure 2-2).
7)
The speaker panel should now be operating properly.
8)
Read the rest of this manual for further information.
Note:
When the panel is initially powered, the call-waiting lamp will blink slowly
indicating the panel is attempting to communicate with the Matrix frame. Once
communication is established, the blinking will stop.
Содержание ECLIPSE ICS-22
Страница 22: ...ICS 22 Speaker Station User Guide Page 22...
Страница 23: ...ICS 22 Speaker Station User Guide Page 23...
