Clear-Com ECLIPSE EASI-PICO MATRIX, Руководство пользователя

Страница: 33 / 73

E a s i - P i c o U s e r G u i d e
2 7
Configuration
Figure 1-30: Easi-PiCo Configuration Screen
Easi-PiCo has four pre-configured maps in its onboard memory. A
"configuration" is a complete set of operating parameters for the matrix system
which includes all talk and listen paths for each connected interface, belt pack or
panel.
You can select and activate any of these maps directly from the PiCo. First, you
select the configuration map to apply. Then when you reset the system, the
selected configuration map goes into effect immediately.
To select a configuration map:
1. From the Main menu, select CONFIGS. The Configuration menu appears
showing the names of each of the four onboard pre-configured maps.
2. Scroll to the desired configuration map's checkbox.
3. Press the setup/enter knob to select the configuration. An "X" appears in the
configuration's checkbox when it is selected. A screen appears asking you to
confirm your selection. Select Yes to confirm your selection or select NO or
EXIT to back out from the changes.
The Reset Options menu appears.
4. From the Reset Options menu, select one of the following.
APPLY AND RESET resets the system to the currently selected configuration,
while restoring active calls and activating any changes made from the PiCo's
front panel since the last reset.
To exit the menu, scroll to and select EXIT.
AUDIO LEVELS
You can adjust both incoming and outgoing audio levels for an audio device
(panel, interface, and so on) connected to an Easi-PiCo port.
Figure 1-31: Easi-PiCo Audio Levels Screen
CONFIGURATON
MAPNAME1 [ ]
MAPNAME2 [ ]
EXIT
MAPNAME3 [ ]
MAPNAME4 [ ]
INPUT LEVEL
PORT { 00 } [ ]
LEVEL { -0 } dB
EXIT