manualshive.com logo in svg

Clear-Com ECLIPSE EASI-PICO MATRIX, Руководство пользователя

Поделиться
Скачать
Clear-Com ECLIPSE EASI-PICO MATRIX Скачать руководство пользователя страница 28

E a s i - P i c o   U s e r   G u i d e

2 2

Note:

You can also select a configuration using the setup/enter knob and 
front-panel display. See Display screens (Configuration) for more 
information. The name of the configuration is displayed in this case.  

To select a new configuration: 

Repeatedly tap the CONFIG button until the desired configuration's light 
(1, 2, 3, or 4) starts flashing. 

While the desired configuration's light flashes, press and hold the configura-
tion button for three seconds, until the light stops flashing, and illuminates 
steadily. 

The selected configuration then becomes the system's active operational con-
figuration.

Power Supply Alarm Lights 

The Easi-PiCo matrix has two internal power supply units. One power sup-
ply unit can power an entire matrix; the second unit provides a backup in 
case of an equipment failure. In addition the two supplies have separate IEC 
connectors to AC mains power and are designed for completely automatic 
and transparent changeover between supplies in the event of an outage on 
one of the AC mains circuits.  

The front-panel alarm lights do not illuminate under normal operating con-
ditions. 

The following conditions cause a power-supply alarm light to illuminate: 

•

If any of the voltages produced by the first power supply unit fall below 
normal levels. 

•

If any of the voltages produced by the second power supply unit fall 
below normal levels. 

Once the power-supply fault condition is no longer present, the power-sup-
ply alarm light goes out. 

LAN status light 

Shows activity on the LAN interface connecter : Activated after upgrade to 
Eclipse PiCo.

Содержание ECLIPSE EASI-PICO MATRIX










































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды