23 EN
Removing / Inserting the Collecting Container
•
Removing:
Hold the device with the collecting container pointing downwards. Press the button for
releasing the collecting container and remove the main unit from the collecting container.
•
Inserting:
On the bottom edge of the main unit there is a locking lug. Plug this into the associated
slot in the collecting container. Then press the two parts of the device together at the top until the
locking mechanism is heard to lock in place. It may be necessary to press the release
button here. Then check whether the collecting container is fitted in place properly.
Use
CAUTION!
•
Never hold the nozzles close to parts of your body or animals during use and do not place
your hands inside the nozzles. They could become stuck to the device/ injured. Should the
cordless vacuum cleaner become stuck, switch the device off immediately.
•
Switch on the device only once you have ensured that the suction nozzle, the collecting
container, the insert and the filter have been inserted correctly.
•
Always switch the device off first before you replace a nozzle or attach or remove any other
accessories!
•
On no account should the device be used to suck up the following:
– Glowing ash, cigarette ends, matches, etc.
– Inflammable or explosive substances –
Very fine dust (e.g. concrete dust), ash or toner –
Pointed, hard objects such as large pieces of broken glass
•
Empty and clean the collecting container after every use or when the maximum fill level
(marking) is reached during use (see the “Cleaning the Device and Accessories” chapter).
•
IMPORTANT:
If there is liquid in the collecting container, do not overfill it and do not turn the
device over with the top pointing downwards so that no water can get into the rectangular
ventilation opening in the insert, and thus to the motor. If this is done the motor will become
damaged and the warranty will be void.
•
Switch the device off after each surface has been cleaned as this will considerably increase
the operating time on each battery charge.
•
Do not use the device when it is connected to the charger.
1. Depending on whether you wish to use the device as a hand-held or as a vacuum cleaner for your
floor, insert the handle rod or detach it.
2. Place one of the nozzles into the suction opening. However, you can also use the cordless vacuum
cleaner without a nozzle.
3. Press the On / Off switch to switch on the device.
4. Guide the nozzle over the surface to be cleaned. Check during use whether the maximum fill level
(marking) on the collecting container has been reached. If this is the case, it needs to be emptied.
5. To switch off the cordless vacuum cleaner, press the On/ Off switch.
6. Empty the collecting container after use and clean its insert and the filter on a regular basis (see
the “Cleaning the Device and Accessories” chapter). Also charge up the battery (see the “Charging
Up the Battery” chapter).
7. Store the cordless vacuum cleaner in a cool, dry indoor room out of the reach of children and
animals.
