4
UNPACKING & ASSEMBLING
Unpacking
Unpack the appliance and all its accessories.
Check that the contents are complete.
Always transport or ship the appliance in its original packaging to avoid damage. Keep the packaging for
such an event. Dispose of no longer needed packaging material according to the applicable regulations of
your country.
Immediately contact your place of purchase if you have found damage resulting from transportation.
Assembly
Insert the end of the suction hose in the intake opening (Fig. 2) of the
vacuum cleaner, until it locks with an audible click.
Insert the hose handle into the upper end of the telescopic tube.
Attach the floor nozzle/powerhead to the bottom end of
the telescopic tube (Fig. 4).
Adjust the length of the telescopic tube. Press down the release
latch on the tube to do this. Then pull the handle of the telescopic
tube to extend it to your desired length (Fig.5).
Let go of the release catch while pulling until it locks in place. You
will hear a distinct click. Your vacuum cleaner is now ready for use.
