23
EN
Problem
Possible cause/solution
The suction perfor-
mance is poor.
• Is the auxiliary air vent on the handle open? Close it.
• Is the dust container too full? Empty the container.
• Are
the
fi
lters heavily laden with dirt? Clean the cyclone
insert and the
fi
lters.
• Is the nozzle, telescopic tube or suction hose clogged?
Turn the device off, pull the mains plug out of the socket
and remove the obstruction.
The device emits
dust when vacuum-
ing.
• Has the dust container not been closed properly and/or is
it not (properly) inserted in the device? Correct this.
• Are
the
fi
lters heavily laden with dirt? Clean the cyclone
insert and the
fi
lters.
The mains cable
will not completely
retract.
• The mains cable has not been correctly retracted into the
device. Pull it out a little and press the cable retraction
button
again.
An unpleasant odour
develops when vacu-
uming.
• Are you using the device for the
fi
rst time? An odour often
develops when using new devices for the
fi
rst time. The
odour should disappear once you have used the device
a few times.
Technical Data
Article number:
Z 08183
Model number:
PC-C008
Voltage supply:
230 V~, 50 Hz
Power: 750
W
Protection class:
II
Dust container capacity: 2 l dust
Cable length :
5 m
Disposal
The packaging material is recyclable. Please dispose of it in an environmentally
friendly manner and take it to a recycling centre.
Dispose of the article in an environmentally friendly manner. It should not be
disposed of in the normal household waste. Please dispose of it at a recycling
centre for used electrical and electronic devices. You can obtain more informa-
tion from your local authorities.
Customer Service / Importer:
DS Produkte GmbH
Am Heisterbusch 1
19258 Gallin
Germany
Tel.: +49 38851 314650
(Calls to German landlines are
subject to charges. The cost varies
depending on the service provider.)
All rights reserved.
Содержание PC-C008
