29
1. Assemble the device in the manner described in the "Assembling the Device" chapter.
2. The mains cable is situated on the back of the vacuum
cleaner, below the button for retracting the cable. Pull the
mains cable out to the length you require, but no further
than the red mark.
3. Insert the mains plug into a properly installed mains socket that is easily accessible.
4. Press the
On/Off button
to switch on the device.
5. To switch off the device, press the On/Off button again.
6. Adjust the suction strength with the aid of the suction
strength control.
7. Guide the nozzle over the surface to be cleaned. The vacuum cleaner can be pulled along
after you like a sledge.
8. After you have
fi
nished vacuuming, press the On/Off button and pull the plug out of the
socket.
9. Hold the mains cable
fi
rmly and press the button for retract-
ing the cable. The cable will automatically be pulled into the
device and wound up there.
10. Empty the dust container regularly (see the "Device Cleaning" chapter) and store the
vacuum cleaner away after use (see the "Storage" chapter).
