26
5. Once all parts are dry, place the exhaust
fi
lter back into the
fi
lter compartment.
6. Fit the compartment cover again and press it down until it engages audibly.
• The other exhaust
fi
lter is located beneath the dust container.
1. Push the release button on the dust bin and pull it out of
the device by the handle.
2. Remove the exhaust
fi
lter from the compartment.
3. Tap the exhaust
fi
lter out over a garbage bin and brush off
any loose dirt. If necessary, wipe out the compartment with
a damp cloth.
4. If necessary, rinse out the exhaust
fi
lter thoroughly with clean, lukewarm water.
ATTENTION:
Do not in any case clean the
fi
lter in the washing machine or dish-
washer!
Then shake off any remaining water and let the
fi
lter air dry completely
before reinstalling it.
Cleaning turbo nozzle
1. To make it easy to clean the turbo nozzle, you can open
the nozzle: To do this, twist the ring on the end piece of the
nozzle anticlockwise.
2. Carefully take off the top housing part. Now you can
remove hair, dust etc. from the brush.
3. After cleaning, put the nozzle back together again and turn
the ring in the clockwise direction until it clicks audibly into
place.
Cleaning the animal hair
fl
oor nozzle
1. Open the cover by pushing the two release buttons on
both sides of the cover and
fl
ip it open.
2. You can now remove hair, dust etc. from the brush.
3. After cleaning, close the cover. It has to click audibly into
place.
Storage
• You can push the telescoping tube together as far as possible and hook the
fl
oor
nozzle into the bracket on the back of the device for convenient storage.
• Store the vacuum cleaner in a dry, cool indoor room that is not accessible for
children and animals.
