21
EN
Technical Data
Article
number:
08935
ID of operating instructions:
Z 08935 M DS V1 0419
Device
Model
number:
P40-FM02ES
Voltage
supply:
7.4 V (2 x Li-ion battery ICR 18650,
2000 mAh)
Power:
15
W
(max.)
Handle
Power supply:
3 V (2 x 1.5 V batteries, AAA type)
Battery
Charging time
:
approx. 2 – 4 hours
Operating time
:
approx. 40 minutes (with fully charged battery)
Mains adapter
Model
number:
XS-0901000VEUD
Input:
100 – 240 V ~ 50 / 60 Hz
,
0.3 A
Output:
9 V DC, 1000 mA
Protection
class:
II
Troubleshooting
If the device does not work properly,
fi
rst check whether you are able to rectify the prob-
lem yourself. If the problem cannot be solved with the steps that are listed, contact our
customer service department.
Do not attempt to repair an electrical device yourself!
Problem
Possible cause
Fix
The battery is not
charging up. The
charge control
lamp (
4
) does not
light up when the
device is connected
to the mains power.
The mains adapter is not
inserted correctly in the plug
socket.
Correct the
fi
t of the mains
adapter.
The barrel connector is not
plugged in the charging sock-
et (
14
) of the device correctly.
Correct the connection
between the charging socket
and barrel connector.
The plug socket is defective.
Try another plug socket.
There is no mains voltage.
Check the fuse of the mains
connection.
The device cannot
be started.
The battery of the device is
too weak.
Charge up the battery.
The On / Off switch (
5
) is in
position
O.
Move the On / Off switch to
position
I.
The batteries in the handle (
1
)
are too weak.
Replace the batteries (see
the “Inserting / Changing Bat-
teries in the Handle” chapter).