Cleanmaxx 04982, Руководство по эксплуатации

Страница: 19 / 42

EN
17
Nozzles
1. Remove hair and fluff from the brush.
2. Detach the cover of the nozzle with
brushes ( 12 ) (see the “Attaching and
Detaching Accessories” chapter –
“Nozzles”).
3. The two nozzles ( 9, 12 ) and the cover
of the brush nozzle can be rinsed with
clear water.
4. Allow all parts to dry in the air.
Hose
The suction hose with handle should be
rinsed regularly to remove residues of the
cleaning agent:
1. Connect possible accessories (see the
“Attaching and Detaching Accesso­
ries” chapter)
2. Pour clear water into a vessel and suck
up the water from the vessel (see the
“Use” chapter).
3. Dismantle all accessories and allow
them to dry in the air.
STORAGE
• Wrap the suction hose ( 5 ) around the
device and place the handle ( 6 ) in the
handle holder ( 10 ).
• Store the device and all accessories
in a cool, dry place which is protected
from direct sunlight and is out of the
reach of children and animals.
TROUBLESHOOTING
If the device does not work properly,
check whether you are able to rectify the
problem yourself. If the problem cannot
be solved with the steps below, contact
the customer service department.
Do not attempt to repair an
electrical device yourself!
The device does not start.
The mains plug is not inserted in the plug
socket correctly.
►
Correct the fit.
The plug socket is defective.
►
Try another plug socket.
There is no mains voltage.
►
Check the fuse of the electrical
distributor (fuse box).
The overheating protection has been
triggered.
►
Pull the mains plug out of the plug
socket and allow the device to cool
down completely. Then try again.
The performance is too weak.
The dirty water tank ( 16 ) is too full.
►
Empty the dirty water tank.
The suction opening / nozzle is blocked.
►
Switch off the device and remove the
blockage.
The dirty water is not properly
sucked up.
The dirty water tank ( 16 ) is full.
►
Empty the dirty water tank.
The suction opening / nozzle is blocked.
►
Switch off the device and remove the
blockage.