User manual robotic vacuum cleaner CleanMate RV500 series
40
General Operation
START
•
To activate the robot press Power Switch for several seconds. LED light must light blue.
•
Press AUTO button on robot or on the remote control. The robot starts to work immediately
in AUTO cleaning mode.
•
To choose another cleaning mode, please, refer section Cleaning Mode Selection.
•
The robot would have short stop while proforming cleaning for area calculation, please, wait
for it done. Stop times varoius in different areas.
PAUSE
•
Pause the robot by pressing the AUTO mode
button on the robot or PAUSE button on
remote control.
•
The robot will be fresh start again if press
AUTO button again.
CLEANING MODE SELECTION
The robot has several cleaning Modes to choose from to effectively clean different floors.
Cleaning Modes are selected with the Remote control.
Everytime switch back to AUTO mode, the robot will be fresh start to clean all areas.
Before start, make sure the AUTO button is blinking blue, which means it is activated, if not,
please long press AUTO button to activate machine.
TIP:
NOTICE!
If you need to Switch off the robot, press Power Switcfh for several seconds until LED
light switch off and you hear one beep.