Cleanmate LDS700, Руководство пользователя

Страница: 74 / 78

21
Common Problems
Problem Solution
The robot cannot be started
· In case of a low battery level, please place the robot on the charging base and align it at the electrode plate,
the machine will be started automatically (if the robot is completely powered off, it can be started automatically
after charged for a while)
·
If the environment temperature is lower than 0 ℃ or higher than 50 ℃ , please use it at a temperature of 0-40 ℃
The robot cannot be charged
The robot cannot be recharged
Abnormal behavior
Abnormal noise in use
Cleaning ability declines or dust
falls out
WiFi cannot be connected
The robot is too far away from the charging base, please put the robot near the charging base and
make another try
Shut down and restart the robot
Main brush, side brush or wheel may be twined by foreign matters, please shut down the robot and
remove foreign matters
Fixed-time cleaning fails In case of a low battery level, fixed-time cleaning can be started only when the battery level is no less than 30%
Whether the robot consumes
power if it is always placed on the
charging base
The robot consumes a little power if it is always placed on the charging base and it enables the best
performance of battery
Whether the robot needs to be
charged for 16h for the first three times
The lithium battery can be used immediately after being charged and has no memory effect
·
The dust box is full, please clear it
· The filter screen is blocked, please clear or replace it
· The main brush is twined by foreign matters, please clear it
· WiFi signal is bad, please ensure is covered by WiFi signal
· WiFi is connected abnormally, please reset WiFi, download the latest APP and try to reconnect it
· Password is inputted incorrectly
·
The router is available for 5G frequency band, the cleaning robot is available for 2.4G frequency band only
·
Please move the robot away, check whether the indicator light of the charging base lights on and
confirm both ends of the power adapter of the charging base are connected well
· In case of poor contact, please clear the charging base shrapnel and the charging contact on the
robot or push the side brush aside