Cleanfix RA705 IBC, Руководство по эксплуатации

Страница: 37 / 64

| 37 | 37 | 37
1. Remove the squeegee assembly from the machine.
2. Fully loosen the two outside knobs on squeegee
assembly. This will separate the spring loaded
blade retainer from squeegee frame . To loosen
the knobs quickly, squeeze the blade retainer and
squeegee frame together.
3. Remove worn blade(s) from the blade retainer.
4. Rotate the rear blade to a new wiping edge and
reinstall blade . Make sure to align the slots in the
blade with retainer tabs.
5. Squeeze the squeegee frame and blade retainer
together and re-tighten the two outside knobs.
3. For models equipped with an on-board charger,
remove the charger’s power cord from the storage
hooks and plug power cord into a properly ground-
ed wall outlet.
4. The charger will automatically begin charging and
shut off when fully charged.
- SQUEEGEE BLADE REPLACEMENT -
FOR SAFETY:
Before leaving or servicing machine, stop on level surface, turn off machine, remove key and
set parking brake if equipped.
Each squeegee blade has four wiping edges. When the blades become worn, simply rotate the blades end-for-
end or top-to-bottom for a new wiping edge. Replace blade if all four edges are worn.
BATTERY CHARGER SETTINGS
The battery charger is set to charge the battery type supplied with your machine. If you choose to change to a
different battery type or capacity, the charger’s charging profile must be changed to prevent battery damage.
English