CleanCraft 7523105, Инструкция по эксплуатации

Страница: 8 / 18

8 DWP - 1106 A | Version 1.03
Transport, packaging, storage
6 Transport, packaging, storage
6.1 Delivery
Check the Water pump on delivery for any visible trans-
portation damage. If you notice any damage to the de-
vice please report this immediately to the carrier or de-
aler.
6.2 Transport
During transport, the water pump must be well secured
so that it can not tip over.
6.3 Packaging
All used packaging materials and packaging aids are
recyclable and should be taken to a materials recycling
depot to be disposed of.The delivery packaging is made
of cardboard, so please dispose carefully by having it
chopped up and given to the recycling collection.
The film is made of polyethylene (PE) and the cushioned
parts of polystyrene (PS). Deliver these substances to a
collection point for recyclable materials or to the waste
disposal company which looks after your region.
6.4 Storage
Store the water pump thoroughly cleaned in a dry, clean
and frost-free environment. Water pumps must not be
stacked on top of each other. Nor may other objects be
placed on top of it.
Step 1: Switch off the water pump and empty it completely.
Step 2: Wipe all accessible surfaces and let the water
pump dry.
Step 3: Rinse the pump out with fresh, clean water and
store it in a dry and frost-free place (at least 5°C).
7 Description of the device
Deep well pump DWP 1106 A
Fig. 3: Description of the DWP 1106 A
1 Pump outlet / pressure line connection
2 Pump housing
3 Intake holes / filter
4 Pump foot
5 Rope lugs
8 Installation
8.1 Notes on installation
DANGER!
Let the water pump cool down completely and empty
it completely.
DANGER!
Risk of frost: If the electric pump has to be switched
off below 0 °C, make sure that there is
no liquid left in the pump. This will pre-
vent parts of the electric pump from
being damaged.
DANGER!
The pump and the entire connection system must be
protected from frost and weather influences.
DANGER!
Use a fastening rope to immerse and pull up the
pump to prevent damage to the power cable.
DANGER!
Operate the pump only when the suction area is fully
immersed.
1
2
3
4
5