Before first use
flexCAT 120 VCA | Version 1.02
9
1 Metal protective filter
2 Filter unit
3 Cartridge filter
6.2 Scope of delivery
The Special Vacuum Cleaner is delivered with:
Fig. 5: Scope of delivery
- Suction hose 1 m incl. connectors
- Connecting tube
- Gap attachment
- Cartridge filter
- Metal grating
7
Before first use
Suction function:
Insert the tube connector into the vacuum cleaner and
then rotate it clockwise until it locked.
Hand the tube connector, rotate it counter-clockwise until
exsert the tube.
Blowing function:
Insert the link pipe of the suction hose in the blowing
mouth (Pos.1, Fig. 3) and rotate it clockwise until it loc
-
ked.
8
Operation
DANGER!
Danger of potentially fatal electric
shock.
There is a risk of fatal injury from contact with live
parts. Electrical components which are switched on
can carry out uncontrolled movements and cause
serious injuries.
- Disconnect the plug before starting adjustments to
the vacuum cleaner.
WARNING!
The device must be correctly installed before use. It
must be checked that the filter elements are moun
-
ted correctly and that they function correctly.
The device should only be operated, mounted, repai
-
red and transported on a stable, flat surface.
WARNING!
Before you handle the switched-off vacuum cleaner
unplug the mains plug.
Regularly check the power cable and plug for
damage (insulation, etc.). A damaged cable must be
replaced before further use of the vacuum cleaner.
The replacement of a defective power cable must be
carried out by the technical service or by qualified
personnel.
When using the extension cord, make sure that it has
the same cable dimension as the power cord of the
device. Avoid getting the cable in contact with the
liquids or conductive surfaces.
ATTENTION!
Before the unit is put into operation, make sure that
the operating voltage indicated on the type plate is
the same as the supply voltage avaible.
