CONGRATULATIONS ON YOUR NEW
LIVING WATER VORTEXér!
Please read these instructions thoroughly to make sure you can use your Vortexér for
many years and have the most benefit of it.
IN THE BOX
Jug with lid, USB cable.
Additionally you will need a USB power adapter. Most households have several USB power
adapters, many rarely used. Therefore we have decided to add only the USB charging cable
to the jug to avoid generating additional electric waste. You can use the USB Charging cable
with any CE certified power adapter (for example from your phone).
CHARGING
If the internal light blinks when pushing any button and it does not start, it is time to recharge.
Please plug the cable into the lid under the red USB cover on one end and into your USB
power adapter on the other end. One charge will provide about 50 vortexes using the few
bubbles button (top left button).
Up to 8 hours fully charged. (
We chose a slow charging
process to make your battery last much longer than with fast charging
.)
CARE AND CLEANING
Remove any lime scale residue with lemon or vinegar. Do not use other types of cleaners or
lubricants. Do not immerse the lid in liquid or put in dishwasher – the electrical parts will be
damaged!
The silver coating on the propeller has an antiseptic effect. Polish it using a soft cloth if it be-
comes tarnished to maintain the antiseptic effect.
Once or twice a week you may want to place the lid on a lukewarm radiator over night. This
will remove any condensation which occurs as a result of temperature changes. Place it with
the propeller facing down.
HOW TO HANDLE THE JUG
Before first use clean jug and lid with moistened kitchen paper or tissue.
1. Always take the lid off the jug before you fill it with water as there
are electrical components in the lid that MUST NOT get wet!
2. Always fill the Vortexér exactly to the mark (image 1b) for it to work
correctly.
3. Put the lid on with the red USB cover pointing towards the pouring
spout (image 1a) and close it by rotating it clockwise so the little
knob on the side is placed above the vortexing symbol (image 2a
and 2b).
4. Place the Vortexér on a stable base during vortexing.
5. Push the button accordingly to “HOW TO START – STEP BY
STEP” (see next page).
6. Enjoy the vortexing process.
7. The water is ready when the vortex ends and it settles. Preferably
wait for another 10 minutes. The peak water quality is reached
after 4 hours, when the hydrogen atoms have stabilized. The
water holds the energy for a long time, up to months, but it is
best to drink it within 1-2 days.
8. Rotate the lid counter clockwise so the little knob is placed above
the drop symbol (image 3a and 3b).
9. Pour your water, drink & enjoy!
Image 1a
Image 1b