Photo 4 XT 60 Connector Plugged into the Delta
Option 2 - Connecting 2 CPP 200w units in a 2 x Parallel / 2 x Series Connection
Format
●
Start by opening the panels face down on a soft non scratch surface allowing
you easy access to the rear of the panels
●
For the first Solar Panel Unit select a Positive (+) and Negative (-) cable and
connect them together. This should leave you with a free Positive and a free
negative cable (see Photo 5)
●
Repeat this for the second panel (see Photo 5)
●
Using the included Positive branch connector insert the free Positive (+) cables
from each of the 200w solar panel units into the positive receivers (see Photos 6
and 7)
●
Using the included Negative branch connector insert the free Negative (+)
cables from each of the 200w solar panel units into the positive receivers (see
Photos 6 and 7)
●
Insert the positive and negative MC4 outputs into the MC4 connectors on one of
the Extension cables ( see Photo 3)
●
Plug the Extension cable (Yellow XT60 Connector) into the Ecoflow Delta (see
Photo 4)
