Clean Air Optima Smart CA-605T, Руководство пользователя

Страница: 6 / 178

6
Power Button:
Press the Power Button to activate the humidifier. The machine is now operating in manual
mode. It will release cool mist on a constant basis with the mist intensity level automatically
set to medium.
Manual Button:
The
Manual Button
changes the mist level (low, medium, high, automatic). There are 3 levels
of mist output available. If the device is in automatic mode, it will automatically adjust the mist
intensity.
Humidity Button:
Pressing the
Humidity Button
, you can select the desired humidity level by pressing
this button repeatedly until the required humidity level is displayed (from 30% to 75% in
increments of 5%). Once you select your desired humidity level, simply stop pressing the
button and your humidity level will be set. The display will blink 3 times and then the setting is
saved.
When the humidity level in the room reaches the set humidity level, the machine will go into
automatic sleep state and stop producing mist. When the room’s actual humidity level drops
below your set humidity level, then the machine will start producing mist again.
Negative Ion Button:
Pressing the Negative Ion Button will activate the negative ion generator with a total capacity
of > 3.000.000 negative ions / cm ³ that are spread through out the entire room and thereby
neutralize pollutants and smells. Negative ions attach onto dust particles, microorganisms
and other unwanted particles in the air and connect them to each other. This way, the particles
become heavier than air and fall onto the ground so that you can no longer breathe them in.
Press the button again to turn off the Negative Ion function.
Negative ions are most found in the forest, mountains and by the sea. Negative ions ensures
fresh and healthy air.
Timer Button:
Pressing the Timer Button sets the timer. The timer function determines how many hours the
humidifier will operate. You can set the timer simply by pressing it once for each hour that you
would like to run the device. The timer can be set from 1 hour to 12 hours. As time passes, the
time value decreases until it goes to 00:00 and the device shuts off.
To turn off the timer function, press and hold the Timer Button for 3 seconds.