Clean Air Optima CA-904B, Руководство пользователя

Страница: 9 / 95

9
3. In operating condition, press the key to shift PTC from low heating power to high heating
power. By pressing the key again, the PTC will switch back to low heating power.
a) If working at low heating power: the low heating power icon lights up (the high heating
power icon is off).
b) If working at high heating power: the high heating power icon lights up. (high heating
starts after 10 seconds).
4. In operating condition, press the key to shift from low fan power to high fan power.
By pressing the key again, the fan switches back to low power.
a) When working at low fan speed: the low fan power icon
lights up.
b) When working at high fan speed: the high fan power icon lights up.
5. In operating mode, you can press the
key to make the device oscillate or not.
a) Press the Swing key: the device will oscillate, the icon lights up.
b) Press the Swing key again: the device will stop oscillating, the icon will be off.
Note:
In warm airflow mode the PTC stops working when the room temperature is higher than
the set temperature. The fan stops working after 10 seconds. During that time, the swing
function is not available.
6. In operating condition, press the
key to set the timer.
a) Go to the timer setting mode, press the
key, the LED time icon lights up and blinks
every 0.5 seconds. During this time-frame, press the or the key to set the timer
(0-12 hours), with each key press the time will be added by 1 hour.
By pressing and holding the or keys, the time can be set faster.
b) If no keys are pressed within 5 seconds (except for and ), the LED indicator will
show the room temperature.
c) Press the timer key to see the set time. If the value shows a number except for -0-, the
timer will start timing (not shown), if the timer reaches value -0-, then the device will
turn off at once.
d) If the value shows -0- in timer setting, then this means no time is set, the time icon will
be off, the LED display will show the current room temperature.