Cleamix VCS-100Cr Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 34

Cleamix VCS-100Cr Скачать руководство пользователя страница 18

Cr 2021-01-02 vs. 2.3

User Manual for VCS-100Cr

17

Hydrogen Peroxide, Humidity and Temperature Sensor HPP272 provides measurement for
vaporized H2O2 concentration, relative saturation, relative humidity, and temperature.

Always remember to use the yellow transport cap when not operating. Protecting the
sensor during storage and transportation prolongs the lifetime of the sensor.

CAUTION!

When there is H2O2 in the sensor's environment, the sensor must always be

powered on. When powered on, the PEROXCAP sensor is heated, which permits using the
sensor  in  condensing  H2O2  conditions,  maintains  measurement  performance,  and
lengthens  the  sensor's  lifetime.  When  the  sensor  is  powered  off,  exposure  to  H2O2
condensation can cause the PEROXCAP sensor to fail within a day, and the sensor will not
recover.

CAUTION!

Do not attempt to open the sensor body. There are no user serviceable parts

inside the sensor body.

Cleaning and Maintenance

You can clean the H2O2 and humidity sensor body and temperature sensor body and cable
by wiping them with a soft, lint-free cloth moistened with water or mild cleaning agent, such
as isopropanol. Do not wipe the filter: wiping the filter may block its pores and/or deposit
residue on the filter. If the filter is heavily contaminated, replace it.

When cleaning, follow these precautions:

• Avoid touching the filter. If you need to touch the filter, always wear clean gloves (cotton,

rubber, or similar material). Keep the filter free of any grease or oil.

• Do not scrape the

sensor body.

• Do not immerse the

sensor in liquid to clean it.

• Wipe cleaning agents off the

sensor after cleaning. If needed, you can spray the sensor

surfaces with water. After cleaning the sensor, it is recommended to perform a chemical
purge.

The sensor must be calibrated regularly so that the measurement result is valid and the
sensor remains long-lasting. The sensor can be delivered to Cleamix for calibration.

HPP272 Sensor

«
...
16
17
18
19
20
...
»

Содержание VCS-100Cr



































Отзывы:

Нет отзывов