background image

WARNING:

no alcohol

8

TAMBORA LINEAR 100

10

CAUTION: 

To ensure optimal operation and performance for a long time it is essential to periodically clean the parts subject to dust and grease deposits. The
frequency with which the following operations are to be carried out depends on various factors, such as the amount of the effects and the quality
of the working environment (air humidity, presence of dust, salinity, etc.).
It  is  recommended  that  the  projector  undergoes  an  annual  service  by  a  qualified  technician  for  special  maintenance  involving  at  least  the
following operations:
- General cleaning of internal parts.
- General visual check of the internal components, cabling, mechanical parts, etc.
- Electrical, photometric and functional checks; eventual repairs.

Cleaning the LED cover

Only use neutral soap and water to clean the LED cover, then dry it carefully with a soft, non-abrasive cloth. (WARNING: the use of alcohol or any other
detergent could damage the LED cover).

4.2 Periodical cleaning & Caution

Parts requiring frequent cleaning.

Light collimation system

This product contains internal light
collimation  system.  Avoid  intense
light from any angle.

Содержание TAMBORA LINEAR 100













Отзывы: