Claydon 15m Straw Harrow, Руководство оператора

Страница: 23 / 28

23
G
PRE-WORK PREPARATION
OPERATORS MANUAL - 9M STRAW HARROW
WORKING HEIGHT
The Claydon Straw Harrow has no depth wheels and is designed to carry its own weight on the tines. If you
are finding that the Straw Harrow is doing more work than you would like you can transfer more of the
harrows weight on the tractors three point linkage.
The tine angle can be altered for aggressiveness from the cab with the hydraulic rake angle adjustment. For
chopped Oil Seed Rape or Bean stubble the rake angle can be at maximum if so required (this position is
most aggressive and moves the most soil), however, on chopped cereal stubble the tines will need to be
angled back to allow the straw to flow through the machine without blocking up.
If you find that the tines are not at an equal angle on both sides of the machine the following steps should be
carried out:
- Firstly operate the tine adjustment until they reach either of their maximum stop positions; (fully forward
or fully back).
- Then return the tines to the required working position, the tine angles should now be equal on both sides.
Aggressive Rake Angle - OSR or Bean Stubble
Shallow Rake Angle - Wheat or Barley Stubble
If one side of the Harrow tines seem to be always creeping back you should check that
there are no leaks in the hydraulic system.
! !
GROUND SURFACE
GROUND SURFACE