Claydon 15m Straw Harrow, Руководство оператора

Страница: 20 / 28

G
PRE-WORK PREPARATION
20 OPERATORS MANUAL - 9M STRAW HARROW
The Claydon Straw Harrow can be mounted onto any compatible three point linkage with the linkage pins
supplied and CATIII balls (not supplied).
Once the Straw Harrow is attached and at the correct working depth, the top link should be set at an angle
in which the convergence point between the upper and lower link arms should fall at the front axle. This
can be achieved by altering the top link pin attachment points on the tractor and machine. This ensures
stability and the mass of the implement is used correctly.
To connect the Straw Harrow:
1. Connect the 7 pin connection plug (
5
) to the 7 pin socket at the rear of the tractor using a safe route so
the cable can’t be caught or snagged.
2. Connect the fold and unfold 1/2” ISO connectors (
1,2, 3 & 4 ) to the tractor.
Connecting Straw Harrow to the Tractor
1. Upper link point
2. Upper hitch point
3. Lower link point
4. Lower hitch point
5. Vertical virtual hitch point
1. Straw Harrow increased tine aggression
2. Straw Harrow decreased tine aggression
3. Straw Harrow fold connection
4. Straw Harrow unfold connection
5. 7 pin connection plug
1.
2.
3. 4.
5.
HYDRAULIC & ELECTRICAL CONNECTIONS
4.
3.
2.
1.
5.