Program & Controller dumps
To dump a Program Sys Ex, or MIDI Controller data via MIDI, either to
another Nord Piano 2 HP or for recording the data into another MIDI
device, proceed as follows:
Sending program dumps
1
Connect the MIDI Out on the Nord Piano 2 HP to the MIDI In on
the receiving device (or use the USB capabilities) .
2
Set up the receiving device to accept MIDI Sys Ex and MIDI
Controller data .
3
Press Shift + MIDI and select the “Dump One” or “Dump All” menu
item using the Up/Down buttons .
4
If needed, set the receiving MIDI device to “recording mode” .
5
Press the Store button to send the dump to the MIDI Out of Nord
Piano 2 HP . The display will inform you when the transmission has
been completed .
M
All program parameters will be sent but NOT the actual piano or
sample sounds.
When dumping back a program that uses a piano sound, make sure
the actual piano are also available in the Nord Piano 2 HP . Otherwise
the parameters in the Sys Ex message will be applied to another avail-
able piano instrument .
Sending MIDI Controller dumps
1
Set up as in steps 1 and 2 in the preceding description .
2
Press Shift + MIDI and select the “Send CC” menu item using the
Up/Down buttons .
3
Press the Store button to send the dump to the MIDI Out of Nord
Piano 2 HP . The display will inform you when the transmission has
been completed .
Receive MIDI SysEx dumps
Here is how to receive a MIDI SysEx Dump:
1
Connect the MIDI Out on the transmitting device to the MIDI IN on
the Nord Piano 2 HP .
2
Initiate the transmission on the transmitting device .
If the dump contained all Programs (All), it will replace all programs
currently stored in the Nord Piano 2 HP . If the dump contained only a
single program, it will be temporarily placed in the currently selected
program memory location .
An asterisk will appear in the display to in the upper, left area next to
the program number to indicate an unsaved edit . You then have to
store the program manually to a memory location using the Store func-
tion (see page 14) .
MIDI Controller list
These are the MIDI Controller numbers used for all the knobs and the
buttons on the Nord Piano 2 HP front panel:
Nord Piano 2 HP Parameter
MIDI
Controller
Kbd Split
14
Transpose
15
Kbd Touch
33
Sustped Off
34
Piano Level
106
Piano Type
12
Piano Model
44
Piano On/Off
46
Clav Model
45
Acoustic Model String Resonance/Release
79
Acoustic Model Pedal Noise
78
Piano Octave Shift
105
Synth Level
51
Sample Select
52
Synth Attack
53
Synth Release
54
Synth On/Off
55
Synth Octave Shift
56
Effect 1 Rate
63
Effect 1 Type
60
Effect 1 On/Off
69
Effect 1 Source
70
Effect 2 Rate
62
Effect 2 Type
61
Effect 2 On/Off
80
Effect 2 Source
71
Delay Mix
75
Delay Feedback
76
Delay On/Off
84
Delay Source
85
EQ On/Off
115
EQ Treble
113
EQ Mid
116
EQ Mid Freq
117
EQ Bass
112
EQ Source
118
Amp/Comp On/Off
86
Amp/Comp Amount
111
Amp/Comp Sel
81
Amp/Comp Source
87
Reverb Wet/Dry
102
Reverb Sel
96
Reverb On/Off
97
Sustain pedal
64
Soft pedal
67
Sostenuto pedal
66
Volume Pedal
11
CHaPter9Midi
| 33
