Clatronic CL 3716, Инструкция по эксплуатации

Страница: 40 / 66

40
CL3716_IM_new 13.12.2018
Troubleshooting
Problem Possible cause Solution
Appliance does not
function.
No power supply Check the power connection.
Timer function is activated. Press the button to turn on the appliance.
The ambient temperature is too low or too high. It is recommended to use the appliance at an ambient temperature of
16 - 35 °C.
The appliance is defect. Contact our service department or a specialist. Please consider the
enclosed service manual.
Appliance does not cool
sufficiently.
The appliance is exposed to direct sunshine. Choose another location or shade the windows.
Windows or doors are open. Close any windows or doors.
There are too many people or other heating
sources in the room.
Remove portable heaters or switch them off.
The filters are dirty. Clean the filters.
The air inlet or air outlet is blocked. Remove the blockage. Keep the ventilation openings free from
obstructions.
Appliance too noisy during
operation.
The appliance is not in an upright position. Place the appliance on a flat surface. Avoid vibrations.
Display indication: FL
The control lamp lights.
The water tank is full. Turn the appliance off. Pull the power plug.
Empty the water tank. You may then restart the appliance again.
The remote control does
not work.
The distance to the appliance is too far. Move closer to the appliance.
You are not holding the remote control towards
the sensor.
Hold the remote control so it points to the sensor. Make sure there are
no obstacles between the remote control and the sensor.
The batteries are dead. Replace the batteries.
Display indication: E1 Temperature sensor defective. Contact our customer service or your dealer.
Display indication: E2
Technical Data
Model: ...............................................................................................CL 3716
Net weight: ............................................................................ approx. 24.5 kg
Power supply: .................................................................. 220 - 240 V~, 50 Hz
Power consumption: ......................................................................... 1010 W
Protection class: ...........................................................................................
Energy efficiency class: .............................................................................. A
Cooling capacity: ........................................................... 9000 BTU (2.64 kW)
Refrigerant: .......................................................................................... R 290
Maximum permissible operating pressure:
Pressure side: .............................................................................. 1.8 MPa
Suction side: ................................................................................ 0.6 MPa
Maximum pressure allowed: ............................................................ 3.0 MPa
WLAN
Supported network: .....................................................................802.11b/g/n
Maximum radio-frequency power transmitted: ................................ 100 mW
Frequency range: .............................................................................. 2.4 GHz
Channels: .............................................................................................. 1 - 13
Supported Wi-Fi keys: ............................................................... WPA / WPA2
The right to make technical and design modifications in the course of
continuous product development remains reserved.
Notice of Directive Conformity
Hereby, Clatronic International GmbH declares that the radio equipment
type CL 3716 is in compliance with Directive 2014 / 53 / EU.
Furthermore, the appliance is in compliance with the requirements of the
RoHS directive 2011 / 65 / EC.
The full text of the EU declaration of conformity is available at the follow
-
ing internet address: www.sli24.de
In the “Download” area, please enter the model name CL 3716.
Tested for operation in Great Britain.
Disposal
Battery Disposal
As a consumer you are obliged by law to return old batter -
ies / accumulators.
Remove the batteries from the remote control before disposing
of the appliance.
Return the batteries to a collection facility for the collection of old batteries
or hazardous waste. Contact your local authority for more information.
Meaning of the “Dustbin” Symbol
Protect our environment: do not dispose of electrical equipment
in the domestic waste.
Please return any electrical equipment that you will no longer
use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on the
environment and human health.
This will contribute to the recycling and other forms of re-utilisation of
electrical and electronic equipment.
Information concerning where the equipment can be disposed of can be
obtained from your local authority.