15
o Carefully turn the hob back over and then gently lower it into the aperture
hole that you have cut out.
o There are holes on the base or the sides of the hob that you can fix the
four brackets to. There are three holes in each one of the brackets.
o You should place the bracket
on the underneath of the hob,
in a position that is appropriate
for the aperture that you have
cut out. Using the screws
provided, fix the bracket
to the hob. These screws
MUST be securely
tightened.
Electrical connection
This appliance must be installed by a qualified person in
accordance with the latest edition of the AS/NZS3000:2007
Regulations and in compliance with the manufacturer's
instructions.
Before connecting the appliance, make sure that the supply voltage marked
on the rating plate corresponds with your mains supply voltage.
WARNING: THIS APPLIANCE MUST BE EARTHED.
o This appliance must be wired into a 30 a double pole switched fused spur
outlet, having 3 mm contact separation and placed in an easily accessible
position adjacent to the appliance. It should not be located above the
appliance and no more than 1.25m away from it.