Classique CLRH60BLSS, Руководство пользователя

Страница: 11 / 23

9
o
Remove the grease filter by sliding the securing nibs at the sides of the grill on
the underside of the rangehood.
o
Disconnect the internal plug leading to the LED light
o
Squeeze the spring clips holding the LED light in place and draw the assembly
out of the rangehood
o
Replace in reverse order using only genuine spare part SYKL10 .
o
IMPORTANT: Defective bulbs should be replaced immediately.
o
If the light still does not work, make sure that the internal plug is fitted properly
before you call for technical assistance.
o
Refit the grease filter.
Fitting the carbon filter (Part number S1)
If the appliance is going to be used in recirculation mode then it is necessary to fit a
carbon filter. This will help to absorb unpleasant odours caused by cooking.
IMPORTANT: Before attempting to fit or remove the carbon filters,
you must ensure the rangehood is switched off first.
1)
Press the handle of the metal grease filter towards the rear part of
the unit until it is released from the front housing, and remove it by
pressing downwards (Fig. 2 - above).
2)
Remove the old carbon filters by twisting them anticlockwise until
they unlatch from the sides of the motor.
3)
Place the new carbon filters (which have two fixing tongues), turning
clockwise so that the tongues latch onto the motor’s sides. (Fig. 3)
4) Reposition the metal grease filters.