© 2017
w w w . c l a s s i c e x h i b i t s . c o m
Step 3 of 5
Order #XXXXX
Backwall Attachments
Completed Assembly
10
10A
2
Canopy
11
Screw
Note:
Curved Extrusion
[10] and Horizontal [11]
stay assembled for
shipping and packing.
*
Item
10
10A
11
11A
Description
30.2” Curved Extrusion
Support Leg
12.184”w Horizontal Extrusion
Flange Plate
Qty.
1
1
1
1
Steps:
1) Connect assembled Extrusions [10/11] and Shelf to Vertical [2].
2) Connect Support Leg [10A] to Curved Extrusion [10].
3) Attach Flange Plates [11A] to tops of Curved Extrusions [10], using screws.
4) Attach Counter Tops to [11,11A]. See
Counter Top Attachment
detail.
5) Attach Wings to A10 clamps. See
Wing Attachment
detail.
6) Place Canopy on posts at top of assembled frame.
Counter Top Attachment
*
Insert Screws, located on underside
of Counter Top, into holes on Flange
Plate then secure with Wing Nuts.
Wing Nut
Fixed
Screws
Flange
Plate
10
11
Counter Top
Slide A10 clamp into
groove of Extrusion.
When desired location
is found, tighten
Set Screw to secure.
Set
Screw
A10
Tighten Black Plastic
Set Screw to secure
Wing in place.
Wing Attachment
Keep A10 clamps
attached to Verticals
Black
Plastic
Set Screw
Shelf
11A
