Classe Audio CA-M600, Руководство пользователя

Страница: 6 / 34

6
Unpacking and Placement
unpacking your amplifier
Carefully unpack your power amplifier according to the supplied instructions,
and remove all accessories from the carton. Please take care when lifting the
amplifier, as it is quite heavy.
Important! Keep all packing materials for future transport of your
Classé amplifier. Shipping your new component in
anything other than its purpose-designed packing material
may result in damage that is not covered by the warranty.
placement Many installations will utilize an equipment rack, although a shelf, a traditional
cabinet or the floor near the speaker(s) are acceptable alternatives. In any
case, take care to position it well away from source components and preamp/
processors, which may be sensitive to the amplifier’s electromagnetic fields.
Note that adequate clearance for the AC cord and connecting cables
must be left behind the amplifier. We suggest leaving six inches (15 cm)
of free space behind your power amplifier to allow all cables sufficient
room to bend without crimping or undue strain.
ventilation
Your Classé power amplifier generates a certain amount of heat in the course
of normal operation. The vents on both the bottom and the top of the
amplifier must be kept free from any obstruction which would reduce the flow
of air through the unit. Avoid placement on soft surfaces that would restrict
airflow (such as plush carpeting).
custom installations
Drawings are included in this manual to facilitate special installations and
custom cabinetry (see the section Dimensions ). A purpose-designed rack
mount kit is included with the CT-M600. Contact your Classé dealer for more
information.
serial number
The serial number for your power amplifier is found on the rear of the unit.
Please note and record this number on the page entitled Important Safety
Instructions for your future reference.