Classe Audio CA-M600, Руководство пользователя

Страница: 18 / 34

18
Installation
Your new Classé amplifier is quite simple to set up and enjoy. Please follow the
steps outlined below in order to safely set up and use your new amplifier.
Important: The AC mains connection should be the last connection you
make on your new power amplifier. In addition, it is always
a good idea to power up your power amplifier(s) last, after
everything else has been powered up and has stabilized. .
Conversely, it is good practice to power the amplifier(s)
down first when shutting down the system, as this
prevents any transients from other components from
getting through to your loudspeakers.
1. Unpack everything according to the included instructions.
Be careful when doing so, as this amplifier is quite heavy.
2. Place your amplifier (be sure to read “Unpacking and Placement”)
and connect it to the AC mains. This includes deciding on the location,
making sure you have adequate ventilation, and adequate clearance for all the
wires behind the amplifier. Once accomplished, connect the amplifier directly to
the AC mains. Do not use extension cords, as most are not suitable for the current
sometimes required by your amplifier.
CT-M600 rack-mount
installation
FOR RACK MOUNTING INSTALLATION CONTACT YOUR CLASSÉ
PROFESSIONAL.
CT-M600 stand-alone
installation instructions
NON-RACK-MOUNT INSTALLATION FOR CT-M600:
1a. Install (4) feet and secure with (4) #6 flat washers and
(4) 6-32 X 9/16 philips pan head screws.
Tighten to
5.0 in-lbs (0.56 N-m)