OP 1418
3/8" D. BUTTERFLY IMPACT WRENCH KIT
USE & MAINTENANCE
Tool use and care
1. Use support handle or other practical ways to secure and support the work piece to a stable platform.
2. Do not force the tool. Use the correct tool for your application. The correct tool can do the job better and more
secure at the rate of tool designed.
3. Disconnect the air supply before making any adjustments, changing accessories, or storing the tool. Always
disconnect the air supply before performing any inspection, maintenance, or cleaning the tool.
4. Use only accessories recommended by the manufacturer for your model.
5. The butterfl y-style throttle valve to adjust speed smoothly in either direction in one continuous motion.
6. Do not leave the tool unattended when it is connected to an air supply.
7. Use compressed air only.
Air supply setup and connecting hazard
1. For best service you should incorporate a regulator, oiler and an inline fi lter.
2. If you are not using an automatic lubricating system, before operating the tool, add a few drops of Pneumatic
Tool Oil to the airline connection. Add more after each hour of constant using.
3. Do not exceed maximum air pressure of 90 PSI/ 6.2 bar or as stated on tool nameplate.
Lubrication & maintenance
Lubricate the tool daily with a good grade of air tool oil. If no air line oiler is used, run a teaspoon of oil through
the tool. The oil can be squirted into the tool air inlet, or into the hose at the nearest connection to the air supply,
then run the tool. The rust inhibitive oil is acceptable for air tools.