OP 1338
CARTRIDGE SPRAY GUN (POLYMER MS)
CONTENT
CHARACTERISTICS
1.Cartridge holder tube
2. Spray cap
3. Handle
4. Pneumatic air supply: ¼ gas male
threaded connector
5. Control trigger
6. Extrusion cap
7. Rear base tube support and cartridge holder
8. Jet control handwheel
9. Material control handwheel
10. Locking ring
11. V-shapped nozzle (CO 1052)
12. Tappered nozzle (CO 1051)
13. Crimping nozzle (CO 1050)
14. Gland stud
15. Screw for inspection of material pipeline
cleanliness
16. Tool for cleaning spray cap
17. Spare O-ring for rear base tube support
and cartridge holder (pos.8)
18. Cartridge holder tube seal
• Adjustable pressure and fl ow rate
• Operating pressure: 3-5bar
• Weight: 1225g
• Plastic cartridge 310ml
• Connection to cartridge: press-fi t
• Air inlet: front
Information on noise emissions
The continuous equivalent A-weighted sound pressure level, measured at a horizontal distance of 100 cm with
sealant product during spraying and pressure of 4 Bar is < 80 dBA. Therefore hearing protection is not required.
In any event suitable ear protectors are recommended in environments with high levels of background noise.
