CLAS OC 0215, Руководство пользователя

Страница: 8 / 12

OC 0215
SPOT WELD AND DENT PULLER
Lever of pulling by point
The welding tip must be longer
than the support.
Polish and clean the welding
tip and screw it in before use.
If the welding tip becomes dull
or black after a long period of
use, please polish it again.
Press the welding tip before
triggering it on the torch.
INSTRUCTIONS
Pulling triangles/stars
1. Contact of the
washer with the
workpiece
2. Discharge
arc
3. Finishing
welding
SPECIFICATIONS
• power setting: 10 currents up to 5000A
• thermal protection indicator
• supply voltage: Volt 50-60Hz (AC)-1Phx230
• fuse: 10 amps
• installation power: 1kW
• cadence: 8 to 5 spot/min
• cable length: 3m
• dimensions: 356x105x170mm
• weight: 9.16kg
Composition :
• spot repairer
• SA0239: inertia straightening hammer for spinning
• SA0240: charger for pulling rings
• SA0241: lever of pulling by point + 2 M5 round electrodes (SA0447)
• SA0245: ring/triangles/stars holder electrode
• SA0247: 50 pulling triangles
• SA0248: 50 pulling stars (5 branches)
• SA0249: 50 pulling rings