CLAS OC 0039, Руководство пользователя, Страница: 7 / 12

OC 0039
TOOL TO HOLD THE CYLINDER HOOD/HATCHBACK
DANGERS : indicates a situation in which an action or lack of action may cause serious personal
injury or even death:
• risk of cutting in the lower part of the tool (shaft housing slot),
• risk of crushing fingers between the slot and the pressure screw,
• tool falling on the body, especially the lower limbs.
APPLICATION AREA
The mechanical properties, the shape and
dimensioning for which it was designed ensure
that Clas strut support clamps can be used in the
automotive sector for:
• Removal and fitting of boot (tailgate) and bonnet
struts on the opposite side. (fig. 1)
max Ø13 mm
1
TECHNICAL SPECIFICATIONS
Strut shaft housing
diameter
Max Ø13 mm
Weight
0.11 Kg
INSTALLATION
After making sure that the strut shaft is free of dirt,
position the clamp at the base of the shaft, inserting
it near the piston, (fig. 2)
2
OPERATION
• Moderately tighten the handwheel of the pressure
screw on the shaft. (fig. 3)
• Carry out the removal and subsequent fitting of
the strut on the opposite side.
MAINTENANCE
• Clas strut support clamps do not require particular
maintenance.
• Good cleaning and storage is necessary, making
sure the tool does not fall, and the slot or the pad of
the pressure screw does not get damaged
3