5. Operation
•
All the weather station’s functions are controlled by pressing lightly on the touch screen display.
The buttons
[ + ]
,
[ON/OFF]
or
[ – ]
are used to change your settings.
•
You can exit the settings mode at any time by pressing on another section of the display.
Indoor temperature
1. Press the section for indoor temperature. The
[ + ]
and
[ – ]
buttons will begin
to flash. Use either
[ + ]
or
[ – ]
in order to change between displaying C
(Celsius) and F (Fahrenheit).
2. Press the same section again in order to set the alarm to sound for high
indoor temperature. “HI AL” is shown on the display. Change the values with
the
[ + ]
and
[ – ]
buttons or turn off the alarm with the
[ON/OFF]
button.
3. When the alarm is activated, the speaker icon is shown on the display.
4. Press the same section a third time in order to set the alarm to sound for
a low indoor temperature. “LO AL” is shown on the display. Change the value
in the same way as for the high temperature alarm.
5. Press the same section for a fourth time in order to display the highest
measured temperature. “MAX” is shown on the display. Delete the value by
pressing it on the display and holding it for 3 seconds.
6. Press the same section for a fifth time in order to display the lowest measured
temperature. “MIN” is shown on the display. Delete the value by pressing it on
the display and holding it for 3 seconds.
7. Press the display a sixth time to confirm settings and return to normal
display mode.
Outdoor temperature
1. Press the section for outdoor temperature. The
[ + ]
and
[ – ]
buttons will
begin to flash. Use the
[ + ]
and
[ – ]
buttons to change between outdoor
temperature, wind chill factor and dew point.
2. Press the section a second time. The
[ + ]
and
[ – ]
buttons will begin to flash.
Use either
[ + ]
and
[ – ]
buttons in order to change between displaying C
(Celsius) and F (Fahrenheit).
3. Press the same section a third time in order to set the alarm to sound for high
outdoor temperature. “HI AL” is shown on the display. Change the values
with the
[ + ]
and
[ – ]
buttons or turn off the alarm with the
[ ON/OFF ]
button.
When the alarm is activated, the speaker icon is shown on the display.
4. Press the same section a fourth time in order to set the alarm to sound
for a low outdoor temperature. “LO AL” is shown on the display. Change
the value in the same way as for the high temperature alarm.
5. Press the same section for a fifth time in order to display the highest
measured temperature. “MAX” is shown on the display. Delete the value by
pressing it on the display and holding it for 3 seconds.
6. Press the same section for a sixth time in order to display the lowest
measured temperature. “MIN” is shown on the display. Delete the value by
pressing it on the display and holding it for 3 seconds.
7. A seventh press returns the device to normal mode.
Humidity Indoor/Outdoor
1. Press the section for humidity in order to set the alarm for high humidity.
“HI AL” is shown on the display. Change the values with the
[ + ]
and
[ – ]
buttons or turn off the alarm with the
[ ON/OFF ]
button. When the alarm is
activated, the speaker icon is shown on the display.
2. Press the same section again in order to set the alarm to sound for high
humidity. “HI LO” is shown on the display.
7
English