Clas Ohlson TCD-983WEC, Инструкция по эксплуатации

Страница: 12 / 64

12
English
10. Playing MP3 files from the USB or memory card
The device can play MP3 files from a USB memory stick or SD/MMC memory card.
1. Insert a USB memory stick/memory card according to the figure. Make
sure to insert the USB memory stick/memory card the right way round
to ensure that the connectors are not damaged. Always push the USB
memory stick/memory card straight in without twisting.
2. Set the [FUNCTION] (15) selector to the CD/USB/SD position and push
SOURCE (5) or (43) to select the USB (USB memory stick) or CARD
(memory card). The display will show the selected source, audio format
and total number of tracks.
3. After a moment the track total will be shown in the display.
4. Press [FOLDER] (4) or (42) once or several times to select a folder for
playback. The folder name will be shown on the display.
5. Use [
►►
I] [I
◄◄
] (3) or (40) to select the desired track within the
selected folder.
6. Press
[
►
II
/■
]
(2) or (39) to start playback.
7. Pausing playback: Press [
►
II
/■
] (2) or (39) again to pause. The display will then begin flashing the current track
number. Press [
►
II
/■
] (2) or (39) again to resume playback.
8. To stop playback: Depress [
►
II
/■
] (2) or (41) for 2 seconds.
N.B. The method of operating the remaining functions are the same as for “7.4 Playing a CD containing MP3 files”
points 7.5, 7.6, 7.7, 7.9 and 7.10.
11. Recording MP3 files from the CD/record player/cassette
The stereo system can record in MP3 format onto the memory card or USB from a CD or record.
A. Recording from CD
I. Recording a CD track
1. Start CD playback as usual.
2. Press [REC] (6) or (36) to start recording (during normal playback). The
icons
will flash during recording.
3. Recording shuts off automatically once complete.
4. Press [REC] (6) or (36) if you want to prematurely stop recording.
II. Recording an entire CD
1. Insert a CD into the CD tray and wait until its info has been read.
2. Press [REC] (6) or (36) to start recording. The
icons will flash during recording.
3. Recording shuts off automatically once complete.
4. Press [REC] (6) or (36) if you want to prematurely stop recording.
III. Recording selected CD tracks
1. Insert a CD and wait until its info has been read.
2. Select desired tracks and save them according to the steps in: 7.10 Programmed playback
(via the remote control).
3. Press [REC] (6) or (36) to start playback icons will flash during recording.
4. Recording shuts off automatically once complete.
5. Press [REC] (6) or (36) if you want to prematurely stop recording.