Clas Ohlson R0060, Инструкция по эксплуатации

Страница: 4 / 28

4
E
n
g
li
s
h
2. Use
AC/DC mains adaptor
Plug the AC/DC adaptor into the DC socket (DC 5 V) on the back of the light
and then plug it into a wall socket.
Batteries
The wake-up light has backup batteries so the alarm will go off even in case of power
cuts. The LED light is not activated when the light is running on the backup batteries.
1. Remove the battery cover on the back.
2. Insert 3 x AAA/LR03 batteries (alkaline) according to the marking in the battery
compartment.
3. Replace the battery cover.
3. Setup
If none of the buttons is pressed for 8 seconds whilst you are making your settings,
the wake-up light will revert to normal mode.
3.1 General Setup
1. Time. Press [SET/MEM] once, “0:00” flashes. Press [ ▲ ] and [ ▼ ] to set the time.
Keep the button pressed in to change the setting more quickly.
2. 12/24 hour clock. Press [SET/MEM] twice, “24h” flashes. Select 12h or 24h
using the [
▲
] and [
▼
] buttons. In 12 hour clock mode, the letters PM appear
on the display.
3. Snooze. Press [SET/MEM] three times. ”Zz” appears and “09” flashes. Set desired
snooze interval (5–60 minutes) using the [
▲
] and [
▼
] buttons.
4. Light.
Press [SET/MEM] four times. The symbol appears and “OFF” flashes.
Set desired function using the [
▲
] and [
▼
] buttons: 15 , the light comes on faintly
and increases in brightness for 15 minutes prior to the alarm sounding. 30 , the
light comes on faintly and increases in brightness during a 30 minute wake-up
period before the alarm sounds.
OFF (deactivated).
3.2 Alarm
Set the daily alarm 1 & alarm 2
1. Press [ALM 1-2] once, the symbol will appear and “0:00” will flash on the display.
Press [
▲
] and [
▼
] to set the time for alarm 1.
2. When in setup mode, press [SET/MEM] to select from: