Clas Ohlson QG11H210, Инструкция по эксплуатации

Страница: 8 / 44

8
English
Instructions for use
Placement
BBQ
• Place the BBQ on a firm, flat and fire-proof surface.
• Make sure to maintain a safety clearance of at least 60 cm from nearby combustible surfaces.
• Never move the BBQ when it is lit or still hot from grilling.
Gas cylinder
• Position the gas cylinder in such a way that it is not exposed to continuous sunlight or other sources
of heat.
• Make sure that the gas hose does not come into contact with any part of the BBQ that will become
hot during use. Ensure that it is not under tension, kinked or in danger of being damaged by other objects.
Connecting the gas cylinder
• Make sure that the regulator is set to OFF before starting to connect the gas cylinder.
• The appearance of regulators and their method of connection varies from country to country.
• The following table shows how to connect 2 types of regulator (A–B).
1.
A
1. Check the rubber seal on the regulator.
If it has been damaged in any way,
the regulator must be replaced.
2. Connect the gas hose to the regulator
(if it is not already attached) and tighten the hose clamp.
Connect the regulator
to the gas cylinder by screwing it into
the valve connector. The pictured regulator has a left-hand
thread.
1
2
B
1. Make sure that the regulator is set to OFF. Lift up
the spring-loaded locking collar and fit the regulator onto
the top of the gas cylinder.
2. Push the locking collar down until you hear a click.
1 2
2. Connect the gas hose to the BBQ and tighten the hose clamp.
The picture shows the connection of a gas hose in
accordance with Swedish standards. In some countries the gas
hose is of a larger diameter and is pushed all the way onto
the connector.
3. Open the lid and make sure that the gas control knobs
are set to OFF .
OFF
HI
LOW
OFF
HI
LOW
4. Open the gas cylinder by turning the handwheel anticlockwise.