6
E
n
g
li
s
h
CR2025
4. Getting started
Insert the battery into the remote controller
The remote controller is powered by 1 × CR2025 battery (3 V).
• Remove any protective plastic from the battery. Insert the battery as shown in the illustration.
Observe the polarity markings.
• When the remote controller no longer works even when held close to the sensor on
the digital photo frame, fit a new battery.
Fitting the support
• Remove the support (12) from its magnetic holder on the back of the photo frame.
• Screw the support into its hole (13). Screw it in firmly (clockwise) but do not overtighten.
• When the support has been fitted, the frame can be stood on its long or short side.
