6
E
n
g
li
s
h
6. Buttons and functions
1. Switch for switching on the device and to start treatment.
2. Press to stop treatment.
3. Press and hold down button 3 seconds to switch off.
▼/▲
Select treatment programme forward. EMS (P01 – P20) – TENS (P01 – P20)
– U (own settings U01-U10) – MASSAGE (P01 – P10).
Select user 1 or user 2.
[S]
Press button for pause and to resume treatment
[CH1 -]
[CH2 -]
1. Reduce output intensity for channel 1.
2. Press to unlock button lock.
[CH1+]
[CH2+]
1. Start treatment.
2. Raise output intensity for channel 1 (or 2).
3. First press [CH1– ] or [CH 2– ] to open button lock (if it has been activated).
Caution:
Read the entire cautionary text before use!
7. Placing the electrodes on the skin
1. Make sure that is skin is completely dry and clean.
2. Press the electrodes tightly against the skin so that there is full contact
over the entire surface.
Caution!
• Wash, degrease, and dry skin before attaching self-adhering electrodes.
• Do not start the TENS/EMS device before electrodes are firmly in place on the skin.
• Never remove electrodes from the skin when the TENS/EMS device is switched on.
8. Switching on TENS/EMS device
Before you switch on the device we recommend that you read through the cautionary
texts, especially under what circumstances the device should not be used. The TENS/EMS
device is not a toy but a powerful auxiliary.
Switching on the device:
Press and hold down
until the display lights up.
