3
E
N
G
LI
S
H
COAXIAL
VIDEO
Pb
Pr
Y
HDMI
5 VDC IN
3
4
5
6
7
8
1
2
4. Functions and buttons
1. Remote control sensor.
2. An indicator lamp comes on when the media player is turned on and flashes
during startup and data transfer.
3. Adaptor connection (5 V DC).
4. USB 2.0 port, type A. For connecting USB memory or external hard disk drives
(does not support USB card readers).
5. HDMI socket, outlet for digital video/audio signals via a HDMI lead (not included).
6. Component video output, component video signal via included lead
(green, blue, red).
7. Composite output, video/audio signal via included lead (yellow, red, white).
8. Coaxial S/PDIF digital audio output to an AV receiver via an RCA lead
(not included).
5. Getting started
Operation
Copies media files from your computer to a USB device which can then be
connected to the media player.
N.B. The remote control battery is fitted with a film of isolating plastic (to stop it
from discharging). This must be removed before the remote control can be used.
1. Connect the media player to a TV or a “home theatre system”.
2. Connect the adaptor to a power point and the DC connector to the socket on
the back of the media player.
3. Press [STANDBY] (on the remote control) to turn the media player on (the blue
indicator lamp will flash initially and then stay lit when the media player is ready
for use).
4. Remote control buttons:
•
[
][
][
][
] for navigating through folders.
•
[
/
] Starts and pauses playback.
•
[
] Stops playback.
5. Press [SETUP] to enter your settings.
