7
E
n
g
li
s
h
Radio
FM radio operation
1. Press [ STANDBY ] to start the speaker.
2. Connect the FM aerial.
3. Press [ MODE ] to select radio mode.
4. The radio will begin playing automatically.
5. Press [ TUNE+ ] or [ TUNE- ] to tune in a channel.
6. Press [ ST./MO ] on the remote to select between stereo or mono.
FM presets
1. Once you have a station that you would like to save, press [ MEMORY ] on the remote.
2. Use [
▼
] and [
▲
] to select a preset, like “P01” for example. You are allowed up to 20 presets.
3. Press [ MEMORY ] to confirm.
4. To listen to any of your preset channels use [
▼
] and [
▲
] to select amongst them.
USB/SD/SDHC
USB playback
1. Insert a USB stick into the USB port. Note: Max memory capacity for the USB cannot exceed 2 GB.
2. Press [ MODE ] to select
USB
mode.
3. Press [ PLAY/PAUSE ] to start playback.
SD/SDHC playback
1. Insert a SD or SDHC card into the slot.
2. Press [ MODE ] to select
SD
mode.
3. Press [ PLAY/PAUSE ] to start playback.
AUX-IN 1 (Line in)
1. Connect one end of a 3.5 mm cable to “AUX IN 1” (4) and the other end to a MP3 player or other audio source.
2. Press [ STANDBY ] to start the speaker.
3. Select
Aux-in 1
mode by pressing [ AUX ] once on the remote.
4. Activate playback on the audio source to begin playback.
AUX-IN 2 (RCA)
1. Connect one end of an a RCA cable to “AUX IN 2” (16, 17) and the other end to a DVD player, stereo,
game console, TV, etc.
2. Press [ STANDBY ] to start the speaker.
3. Press [ AUX ] to select
Aux-in 2
mode.
4. Activate playback on the audio source to begin playback.
Treble and bass
Use [ BASS- ]/[ BASS+ ] and [ TREB- ]/[ TREB+ ] to adjust the bass and treble.
