5
English
750 W
1250 W
2000 W
Setting the desired temperature
1. Turn the thermostat knob to the maximum setting.
2. Select a power setting (experiment to find the best setting for the location).
3. When the desired temperature has been reached, slowly turn the thermostat knob
back until it clicks and the heater is switched off.
4. The heater will maintain the set temperature by automatically switching on and off.
5. With the thermostat knob set to
MIN
, the heater will maintain a room temperature
of around 5 °C.
Note:
Bear in mind that factors such as the size of the room, the outside temperature
and how well the building is insulated, all affect the ability of the heater to warm
the room up. If the room is too big, the heater might not be powerful enough to reach
the desired temperature or even keep the room above 5 °C.
Assembly
Securely attach both feet to the bottom of
the convector heater using the supplied sheet
metal screws.
Note:
The convector heater must not be used
if the feet are damaged or missing.
Operating instructions
Note:
The first time the heater is switched on it can emit a slight odour and smoke,
this is completely normal.
1. Place the convector heater on a firm, level surface.
2. The heater has three power settings, each power setting can be used with or
without the fan.