Clas Ohlson Coline CW3120, Инструкция по эксплуатации

Страница: 8 / 40

ENGL
IS
H
8
• When the timer turns off the blender, the LED indicators on the control panel start
flashing to indicate this.
• The indicators will flash for 12 seconds and then turn off. You must return the knob
to the
0
position to deactivate the timer regardless of whether the 12 seconds
have passed.
Care, maintenance and storage
• Turn off the blender by setting the function knob to the 0 position and then unplug it.
•
Never
immerse the motor unit in water. Wipe the outside of the motor unit with
a clean, damp cloth. Use only mild cleaning agents, never solvents or corrosive
chemicals.
• Switch the blender off, unplug the mains lead from the wall socket and store
the cleaned blender in a dry, dust-free place out of children’s reach whenever it is
not to be used for an extended period.
Control the blender manually
Turn the knob clockwise to the desired speed.
The blender has a built-in timer that is activated
when you choose to control the blender manually.
The timer turns off the blender after a set time depending
on the selected speed. Refer to the table below:
Selected speed Time (sec) before the timer
turns off the blender
1 600
2 450
3 300
4 240
5 180
6 120
• If you remove the sealing ring from
the lid to wash it, make sure that it
is refitted the right way up. The little
flange on the sealing ring should be
at the bottom.