GREAT BRITAIN •
CUSTOMER SERVICE
tel
020 8247 9300
internet
www.clasohlson.co.uk
postal
10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
Ver
. 20170927
USB RGB Tape Light
Art.no 36-1120
Model LS520A
Please read the entire instruction manual before using the product and then save it for future reference.
We reserve the right for any errors in text or images and any necessary changes made to technical
data. In the event of technical problems or other queries, please contact our Customer Services.
Operation
1. Hold the tape in place against your monitor and plug it into a USB port.
2. Press [ MODE ] repeatedly to change the light mode and test what the light will be like before
removing the release liner film from the back of the tape and before shortening the tape.
3. If you need to shorten the tape, unplug it from the USB port and cut it to the desired length.
Note:
Only cut the tape on the markings.
4. When you have decided upon the final positioning and length of the tape, make sure that the mounting
surface is clean and free of dust before removing the release liner and attaching the tape.
5. Route the cable in such a way that it will not be damaged or crushed.
6. Plug the cable into a USB port.
Care and maintenance
Use a dry cloth to wipe the tape clean when needed.
Responsible disposal
This symbol indicates that this product should not be disposed of with general
household waste. This applies throughout the entire EU. In order to prevent any harm
to the environment or health hazards caused by incorrect waste disposal, the product
must be handed in for recycling so that the material can be disposed of in a responsible
manner. When recycling your product, take it to your local collection facility or
contact the place of purchase. They will ensure that the product is disposed of in
an environmentally sound manner.
Specifications
Connection
USB
Tape length
50 cm
Cable length
1 m
Power
1.5 W
