5
English
Operating instructions
The shoe dryer can be mounted on a wall or laid flat on the floor or a table. When the shoe
dryer is used lying down, the stand under the hose connections should be folded out.
Wall mounting
1. Screw the wall bracket to a wall, at least 50 cm above floor level. The shoe dryer
must be at least 50 cm away from the ceiling or an adjoining wall.
2. Slide the shoe dryer into the wall bracket from above.
3. Attach the flexible hoses to the shoe dryer.
Note:
The ends of the hoses are
different; the ends which attach to the shoe dryer have protrusions which fit into
the outlets on the shoe dryer.
50 cm
50 cm
50 cm
Min.
50 cm
4. Screw the glove dryer to the wall next to the shoe
dryer, or stand it on the floor. The glove dryer has slots
on the back enabling it to be hung up on two screws.
Make sure that the glove dryer is positioned where
the hoses reach the connections.
5. Using the shoe dryer to dry gloves. Attach the included
glove holders to the top of the glove dryer. Connect two
of the flexible hoses to the glove dryer. Set the air
regulator on the front of the glove dryer to 1 to
create a supply of hot air. Place the wet gloves onto
the glove holders.
6. Using the shoe dryer to dry shoes and boots.
-
Place the wet shoes under the shoe dryer.
-
Insert a flexible hose into each shoe/boot.
