35
6. Push
O K
RD
/ P
again,
OFF
is shown.
7. Use
▲
or
▼
to select
ON
or
OFF
.
8. Push
O K
RD
/ P
to confirm.
If you chose ON in the step above, NUMBER 1 will be shown
(if a number has already been programmed it will show on the
bottom line).
If you selected
OFF
, go to point 13.
9. Push
O K
RD
/ P
and enter the number with the digit buttons. Push
R/DEL if you want to remove one or several digits.
10. Confirm with
O K
RD
/ P
, the display shows the number entered.
11. Use
▲
or
▼
to add more numbers to a vacant spot (e.g.
NUMBER 2
,
NUMBER 3
etc.).
12. Push
O K
RD
/ P
to add the number according to point 5, 9 & 10.
13. Push
O K
RD
/ P
to return to standby mode.
Reset the manufacturer’s settings
1. In
▼
standby mode push
O K
RD
/ P
once,
PHONEBOOK
is shown
on the display.
2. Push
▼
three times,
HS SETTINGS
is shown.
3. Push
O K
RD
/ P
,
ALARM
is shown.
4. Push
▼
once,
HS DEFAULT
is shown.
5. Push
O K
RD
/ P
,
PIN ?
is shown. Enter the PIN code
(preset code 0000).
6. Confirm the setting with
O K
RD
/ P
. The receiver restarts and
searches for the base unit before returning to standby mode.
