31
Registration of receivers
The receiver which is delivered with your base unit normally does
not need to be registered, only with new receivers that have been
bought separately. Each receiver can be registered for up to four
base units, numbered 1 to 4. If the display on the receiver shows
UNREGISTERED
you must register it to the base unit.
1. In the standby mode push
O K
RD
/ P
once. The display will show
PHONEBOOK
.
2. Push
▲
twice,
REGISTRATION
is shown.
3. Push
O K
RD
/ P
,
BASE 1
is shown.
If the receiver is already registered to a base unit a + sign is
shown to the right of the base unit’s name on the display.
4. Push
▼
to select a number for the base unit (BASE 1,2,3 or 4).
5. Push
O K
RD
/ P
,
PIN ?
is shown. Enter the base unit’s PIN code.
Preset code for the base unit is
”0000”
.
6. Push
O K
RD
/ P
to confirm. The search starts and the display show
SEARCHING x
.
7. Simultaneously push the
button on the base unit until the
indicator on the base unit starts flashing.
8. When registration is complete the receiver beeps to confirm.
The receiver’s name is shown on the display and the indicator
on the base unit shuts off.
Choosing unit
If the receiver is registered for more than one base unit (up to 4)
you can choose the base unit the receiver should be used with.
1. In standby mode push
O K
RD
/ P
once,
PHONEBOOK
is shown on
the display.
2. Push
▼
three times,
HS SETTINGS
is shown.
