E
N
G
LI
S
H
Example: Finding the location (starting point)
where you have parked your car
1. Hold in the right button for approx. 1 second to turn on the GPS
receiver. Make sure that you are outdoors in an open area for
the best possible reception.
2
flashes when the GPS receiver is scanning for satellites
(The device must locate at least four satellites before it is ready
for use).
3. When the icon stops flashing the device will be ready for use.
4. The last saved starting point should be automatically displayed
(in our example, A), if not you can manually press the right but-
ton the required number of times to reach A.
5. Directions (bearings) are shown by the directional arrow at the
bottom of the display and the distance is given (as the crow flies)
to A is displayed by the large number display above.
6. You have reached your saved destination when the display
shows “0” and all the directional arrows appear simultaneously
on the display.
Important:
• Remember which of the four designations you have saved your
position on so that you are certain that you are going in the right
direction.
• ONLY hold in the left button when you wish to save a destina-
tion. If you hold in this button by mistake, your previously saved
position will be erased.
• When changing battery some saved data may be erased.
